Stay Brite® Lead-Free Solid Wire Solder Kit
• 14.2g Bottle
• Industry standard solder for HVAC connections
• Engineered to provide strong, ductile connections on copper, brass, steel and stainless steel
• Silver color is a good color match to stainless steel
• The low temperature/rapid melting characteristic promotes capillary flow and less base metal distortion and oxidation
• Ideal for very tight connections
• Complies with the EU Reach & RoHS directive
• The kit includes 3/64 in. (1.2 mm) x 1/2 oz. (14.2 g) solder wire and 1/2 fl.oz. (.0148 L) Stay-Clean liquid soldering & tinning flux
Doke EK25
4m long
made in Italy
uses standard consumable’s
DETAILS
Dynaflow® melts and flows at temperatures very close to Stay-Silv® 15 and provides comparable brazed mechanical properties. This makes Dynaflow® an excellent cost-effective alternative to the 15% silver alloys. This premium, medium range silver alloy has been meticulously formulated to even tighter specifications than our standard copper-to-copper alloys.
Features
Premium, medium-range, alloy for brazing copper or brass.
Excellent strength and ductility.
Economical replacement of 15% silver alloys.
When heated above its liquidus, can penetrate tight connections.
Wide melting range provides ability to fill loose connections and "cap" or "build-up" around the finished joint.
Self-fluxing on copper and copper-to-copper connections. Use Stay-Silv® white flux for brazing brass or copper-to brass.
Corrosion resistance is generally similar to the copper base metal
Not recommended for brazing steel or other ferrous base metals
Due to its phosphorus content, should not be used if the braze is exposed to sulfur or sulfur compounds in service.
Complies with the EU Reach & RoHS directive
Typical Applications
Copper-to-copper brazing
Aluminium-filled | gap-filling | fastcuring| high peel and impact strength
WEICON Aluminium Minute Adhesive is an odourless, two-component epoxy adhesive filled with aluminium. It cures fast at room temperature and practically without shrinkage. After curing, the adhesive can be machined (filing, drilling, milling). Aluminium Minute Adhesive is gap-filling and non-dripping (thixotropic) and shows very high tensile, impact and peel strength. The adhesive is particularly suitable for bonding aluminium and other light metals. It can be used for filling cracks and holes on aluminium housings, for example, and for repairing light alloy wheels. In order to achieve optimal adhesion, the bonding surfaces should be dry and free from grease or dirt. Scraping or sanding the surfaces before cleaning additionally improves adhesion.
Features Include-
Wt. 1.8kg
Rugged all metal construction
Monel filter to improve life; easily changed
Accurate - full cylinder pressure is controlled by the large 70mm diaphragm
Large flows
Safe, modern, proven seat design
Large, easy to read colour coded gauges with safety seals
Complies to AS 4267
Built in burst relief
Unique extra safety of the Snap Safe valve, built into inlet stem. Protects if a cylinder falls over.
DETAILS
Model 730 Single. Stage Cylinder Regulator to use with Argon, CO2, Acetylene & Oxygen. Regulator designed to seal and reduce risk of leaks. Smooth adjustament, with high precision
Features
Flow to cut up to 150mm of steel
Quality metal cased 50mm pressure gauges
Internal safety relief valve fir added safety on oxygen and argon
